http://www.dunlopracing.com/Warmers.pdfTire Warmer Recommendation Procedures
1) Set temperatures for warmers to 70c (158 F) or MEDIUM or ON depending on style of warmers. Heat for 45 - 60 minutes. Front and Rear tires same.
2) Set the hot starting pressure immediately before going out on the track (see PRESSURE RECOMMENDATION chart)
3) If the bike returns to the pits and is then going straight out on the track, DO NOT reset the pressures to the starting pressure.
4) If the bike is going sit in the pits between sessions; put the warmers on and leave unplugged. Then 20-30 minutes before your session, plug them in.
5) If the bike is going to sit more than 2 hours, start back at #1 above before the next session.
Call your distributor below for any other tech questions:
Get pressure recommendations from
http://www.dunlopracing.com/pressures.pdfEast of the MississippiRace Tire Service800-772-8473
West of the MississippiErion Racing800-700-3599
_________________
Ἢ τὰν ἢ ἐπὶ τᾶς
www.WickedRacing.com - Go Fast Parts & Gear for Riders and Their Motorcycles
PM me for "TrackWhore" special discounts