..:: TRACKWHORES.com ::.. https://trackwhores.com/ | |
My f150 has let me down. https://trackwhores.com/viewtopic.php?f=13&t=408 |
Page 1 of 2 |
Author: | twotyres [ Tue Oct 06, 2009 9:24 pm ] |
Post subject: | My f150 has let me down. |
So i have had this truck for 9 years and put 120K on her, it has only had a few minor problems and maintenance things done to it. Last week it let me down, i got a nasty misfire. i checked the codes and decided it needed new plugs, put them in along with new coils, cleaned up the throttle body and expected it to run like a champ. It didn't, after checking it out and getting frustrated i took it to the dealer to get it diagnosed on their machine. Found out it had a dead cylinder #4 has 0 compression. looks like i might be pulling the head or worst case, the engine. The only upside is my dad is too sick to drive so i have been using his truck for the last few weeks. |
Author: | madski [ Tue Oct 06, 2009 10:59 pm ] |
Post subject: | Re: My f150 has let me down. |
that sux..... hope your dad's OK too. |
Author: | twotyres [ Wed Oct 07, 2009 4:20 pm ] |
Post subject: | Re: My f150 has let me down. |
Author: | madski [ Wed Oct 07, 2009 4:22 pm ] |
Post subject: | Re: My f150 has let me down. |
good to hear Lee. truck's the easy part ![]() |
Author: | GixxrSixxr [ Wed Oct 07, 2009 4:58 pm ] |
Post subject: | Re: My f150 has let me down. |
Fix Or Repair Daily Found On Road Dead ![]() |
Author: | silvr6 [ Wed Oct 07, 2009 5:14 pm ] |
Post subject: | Re: My f150 has let me down. |
Author: | GixxrSixxr [ Wed Oct 07, 2009 7:25 pm ] |
Post subject: | Re: My f150 has let me down. |
Author: | twotyres [ Wed Oct 07, 2009 9:36 pm ] |
Post subject: | Re: My f150 has let me down. |
well its just a broken valve spring. valves is still intact and appears to be ok but i think i am going to pull the head and replace it to be safe. It must have contacted the piston because this is an interference fit engine. The last thing i want is the valve being fractured and breaking off when hundreds of mile from home pulling my trailer. Looks like i will be busy the next few evenings and weekends. Justin, didnt this truck bail you out when yours let you sit. ![]() |
Author: | twotyres [ Sun Oct 11, 2009 9:12 pm ] |
Post subject: | Re: My f150 has let me down. |
got the old girl all tore down. my first time dealing with SOHC. ![]() head removed ![]() Broken spring ![]() no piston damage ![]() |
Author: | madski [ Sun Oct 11, 2009 9:24 pm ] |
Post subject: | Re: My f150 has let me down. |
hey so long as the piston is untouched you're golden. it's a PIA but could be a lot worse. get those heads ported and polished, angle job on the valves while you're at it ![]() we took my buddies M3 top end apart once, variable valve timing set up with dual overhead cams, 4v, and the good old German approach of why use 1 part when 13 will work just as well - that was a barrel of laughs... love the lager in the first pic ![]() |
Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |