Author |
Message |
stevedave
|
Post subject: Teknic suit sizing Posted: Tue Jan 24, 2012 8:16 am |
|
 |
Major 'Ho |
 |
Joined: Tue Apr 28, 2009 5:48 pm Posts: 984 Location: PA
Current TrackWhore(s):
Bike/Plate #: 65
|
I've only had A* suits, so not sure on the sizing for Teknic so was hoping someone who has used both could maybe give me some insight. I wear a 44 size A* suit, is Teknic sizing similar? I've looked at each's sizing chart and they seems to be smaller/bigger in different areas. Either way, guy on the NESBA board posted up a 46 Teknic suit for $225 shipped and was thinking of picking it up. Guess I could sell it if it doesn't fit.
Also, for those that have used Teknic, are you happy with them?
|
|
 |
|
 |
madski
|
Post subject: Re: Teknic suit sizing Posted: Tue Jan 24, 2012 10:23 am |
|
 |
Site Admin |
 |
Joined: Wed Apr 22, 2009 1:27 pm Posts: 3474
Current TrackWhore(s):
Bike/Plate #: 369
|
A few years ago Teknic had a rep for running small. Apparently they have adjusted their sizing these days and now fit along the same lines as the rest of them. I think Jr. has "tested" Teknic suits a number of times without permanent reminders 
_________________ Ἢ τὰν ἢ ἐπὶ τᾶς www.WickedRacing.com - Go Fast Parts & Gear for Riders and Their Motorcycles PM me for "TrackWhore" special discounts
|
|
 |
|
 |
foster
|
Post subject: Re: Teknic suit sizing Posted: Tue Jan 24, 2012 11:05 am |
|
 |
Serious 'Ho |
 |
Joined: Wed Sep 16, 2009 3:04 pm Posts: 383 Location: Buffalo, NY
Current TrackWhore(s):
Bike/Plate #: 535
|
Mike is spot on. I've got an older Teknic (2 or 3 years old) and its one size smaller than the A* were at the time. I've heard the new stuff is more in line with the other manufacturers sizes. I think I got mine for $350 lightly used without any rash.
FWIW, I wear a 46, I had to have mine altered a bit. I needed more room in the shoulders/upper arms and added more length to the torso because my boys were in serious pain when standing. I wear an A* back protector and want to wear a chest protector but there is no room unfortunately. I'm not quite 6'1" 190lbs.
Durability has been great though, been down in it twice without busting any seams. I got a dime sized hole in the outer layer from sliding on my ass which I've had repaired, but that's it.
_________________ Ben #535
|
|
 |
|
 |
sideshowbob
|
Post subject: Re: Teknic suit sizing Posted: Tue Jan 24, 2012 9:12 pm |
|
 |
'Ho Proper |
 |
Joined: Fri Oct 23, 2009 6:25 pm Posts: 115
Bike/Plate #: 992
|
I just bought a new Teknic this fall,I remember reading the 09 models were sized small and you had to go up one.I have a old Hein Gericke that was a 38 and was real tight and could hardly stand but fit good sitting on the bike.It finally stretched out perfect.The new Teknic I bought was 40 and it too fits tight,calves especially and some in the shoulders.I think it will stretch in to fit perfect after a couple good hot days.I would rather have it a bit too tight than loose and my two piece Alpinestar is.Hope this helps some.
|
|
 |
|
 |
stevedave
|
Post subject: Re: Teknic suit sizing Posted: Tue Jan 24, 2012 9:52 pm |
|
 |
Major 'Ho |
 |
Joined: Tue Apr 28, 2009 5:48 pm Posts: 984 Location: PA
Current TrackWhore(s):
Bike/Plate #: 65
|
Thanks guys. I opted to not get this used suit after the guy said he used it for 60 or 70 trackdays (can imagine what it smells like). Plus I landed some real good deals from SBTG on closeout items. Now I just need to lose a few pounds to get back into my previous suit size 
|
|
 |
|
 |
GixxrSixxr
|
Post subject: Re: Teknic suit sizing Posted: Tue Jan 24, 2012 10:47 pm |
|
 |
'Ho Extraordinaire |
 |
Joined: Tue Apr 28, 2009 2:17 pm Posts: 1371 Location: York, PA
Current TrackWhore(s):
Bike/Plate #: 45
|
_________________
LETS GO PRAIRIE DOGGIN!!!!!!!!!YEEE HAWWWW!!! WERA & NESBA #45
|
|
 |
|
 |
|